Mold Testing and Inspection in Suwanee and Gwinnett, GA

What Mold Testing Tells You, and Why You Test First

Mold testing shows whether mold is growing in your home, how much is in the air you breathe, and where it is hiding. Fresh Cleaning Solutions tests homes across Suwanee, Gwinnett, Forsyth and North Fulton with air samples, a moisture check and a camera inside your ducts, so you get answers instead of guesses.

People use two words for this, and they are two parts of the same visit:

• Mold inspection is the hands-on search. We walk the home, check for moisture and water damage, look in the attic and crawl space, and put a camera in your ductwork.
• Mold testing is the proof. We take air samples and send them for lab analysis, so you know what is in the air, not just what you can see.

You get both. That matters because a mold problem you cannot find is a mold problem you cannot fix. Testing first tells you whether you need a full mold remediation, a duct cleaning, a dehumidifier, or nothing at all. You only pay to fix what is actually there.

Signs You Need a Mold Inspection

Mold rarely announces itself. Most homeowners call us after one of these:

• A musty or earthy smell that comes back, especially when the AC or heat kicks on
• Dark spots on ceilings, walls, vent covers or around windows
• A past leak, a roof or plumbing problem, or water in the crawl space
• Allergies, sneezing or stuffy mornings that get better when you leave the house
• Sticky, damp air inside during Georgia summers
• Buying, selling or renting a home and wanting a clean answer before closing
• Mold was removed before and you want proof it is gone

If any of these sound familiar, book a mold inspection near you before the problem spreads. Call (678) 609-8713. We answer 24 hours a day, 7 days a week.

How Our Mold Testing Works

Every visit follows the same clear process, so you know what you are getting before we start.

1. Walkthrough and moisture check. We ask what you have noticed, then check the rooms, attic and crawl space for moisture, water damage and visible growth.
2. Air samples. We take air samples in the problem areas and compare them so you can see where the mold is concentrated.
3. Duct camera inspection. A camera goes into your ducts. You see the dust, debris and any mold on the screen with us. This is free with any service.
4. Lab-backed results. Samples go for lab analysis. We walk you through the results in plain words and show you what the numbers mean.
5. A clear plan and a flat rate. If you need a fix, you get the exact flat rate in writing. No hidden fees, no pressure.
6. Re-test after the fix. After remediation or cleaning, we test again so you see the before and after numbers side by side.

What You Get at the End

• A plain-word report of what we found, room by room, with the lab-backed air sample results
• Duct camera photos so you can see the inside of your system for yourself
• The source of the moisture, whether it is a leak, the crawl space, the attic or high humidity
• A clear recommendation: clean, remediate, dry it out, or leave it alone because nothing is wrong
• An exact flat rate for any fix, in writing, with no hidden fees

Most mold testing companies stop at the air sample. We look at the whole home, including the HVAC system that moves air through every room, because that is where a lot of hidden mold in Gwinnett and Forsyth homes turns up. You get one answer that covers the house and the system together, so the problem is found once and fixed once.

Mold in Air Ducts and Black Mold in Air Vents

Your HVAC system pulls air from every room, runs it past a cold, wet AC coil and pushes it back out. In a humid Georgia summer, that makes ducts and vents one of the first places mold grows. It is also the place most mold testing companies skip.

Signs of mold in air ducts include a musty smell when the system turns on, black or dark speckles on vent covers and the ceiling around them, and allergy symptoms that get worse with the AC running. Black mold in air vents spreads spores into every room the system reaches, so it is worth checking before you just wipe the vent cover.

Because we put a camera in your ductwork on every mold inspection, you see exactly what is inside. If we find growth, the fix is clear:

• Air duct cleaning with a negative-air machine and rotary brushes on every supply and return line
• Duct sanitizing with an EPA-registered sanitizer and deodorizer to kill what is left and clear the smell
• AC coil cleaning when the growth starts at the coil
• Mold remediation when mold has spread into walls, the attic or the crawl space

Mold Testing Cost in Suwanee and Gwinnett

Mold testing typically runs $300 to $500, depending on the size of the home and how many areas need samples. You get the exact flat rate after a free inspection, before any work starts.

Not sure mold is the problem? A full home air quality test checks particles, humidity and VOCs too. See all our prices and current specials.

Why North Atlanta Homes Get Mold

Mold needs moisture, and North Atlanta has plenty. Humid summers keep indoor air damp. Many homes here have crawl spaces that hold moisture under the floor and attic ductwork that sweats in the heat. Those are the spots we check first.

When high humidity is the cause, the long-term fix is often a crawl space or whole-house dehumidifier so mold does not come back after cleanup.

Searching for mold testing near me? We are based at 530 Highland Station Dr in Suwanee and serve homes and businesses in Duluth, Lawrenceville, Buford, Sugar Hill, Dacula, Johns Creek, Alpharetta, Cumming, Milton, Roswell, Norcross, Snellville, Grayson, Lilburn, Peachtree Corners, Flowery Branch, Braselton and Hoschton. Locally owned since 2016. Call (678) 609-8713 for same-day mold testing.